| ARTICLE |
AUTHOR |
ISSUE DATE |
Process Control Goes Green |
John Mangan |
Winter 2008 |
The Cold Facts About Cryogenic Valves |
Raphael Couturier |
Winter 2008 |
How to Achieve Optimal Control Performance |
Shawn Anderson and
Neal Rinehart |
Fall 2007 |
BACK TO BASICS: The Dependable Diaphragm Valve |
Dan Ellis |
Fall 2007 |
BACK TO BASICS: The Industrious Control Valve |
Jim Casey |
Summer 2007 |
Challenges and Opportunities in the Water & Wastewater Market |
Jim Barker |
Summer 2007 |
Valve Speciying for Beginners |
Patrick Toensmeier |
Spring 2007 |
Are You Happy with your HRH Bypass Control? |
Geoffrey Hynes |
Spring 2007 |
| BACK TO BASICS: The All-Encompassing Ball Valve |
Brian Hood |
Winter 2007 |
Valve Position Monitoring and Smart Discrete Controls |
Jack DiFranco, Jr. |
Winter 2007 |
| PRV Management Tools Help Optimize Turnarounds |
Bart Collins, Scott Smith and David Melcher |
Spring 2007 |
Valve Specifying for Beginners |
Patrick Toensmeier |
Spring 2007 |
| BACK TO BASICS: Butterfly Valves |
Joanne Lunsford |
Winter 2006 |
| OEM vs. Non-OEM Parts: You Make the Call |
Ted Grabau |
Winter 2006 |
| LNG: Getting to the Finish Line |
Jacob Dweck and
David Wochner |
Winter 2006 |
| Solenoid Pilot Valves for Valve Actuation |
Bill Reeson |
Winter 2006 |
| Extreme Valves |
Mark Ward, Sr. |
Winter 2006 |
| The Critical Needs of SIP Processes |
Dell Grunenberg |
Spring 2006 |
| Fluid Jet Energy Criterion for Control Valves |
Herbert L. Miller, Laurence R. Stratton and Mark A. Hollerbach |
Spring 2006 |
| BACK TO BASICS: The Always Reliable Plug Valve |
Jim Barker |
Spring 2006 |
| BACK TO BASICS: The Misunderstood Check Valve |
Mike Johnson |
Summer 2006 |
| Wear- and Corrosion-Resistant Alloys in the Oil & Gas Industry |
James B.C. Wu and Matthew X. Yao |
Summer 2006 |
| Casting Basics |
Dick Warda, PhD |
Fall 2006 |
| Forging Facts |
Lisa Kuehl |
Fall 2006 |
| Fundamentals of Electric Actuator Control |
Richard D. Oaks |
Fall 2006 |
| Desuperheating for Accurate Steam Temperature Control |
Joel W. Kunkler |
Fall 2006 |
| BACK TO BASICS: How to Size and Select Relief Valves |
Anthony Fabbo |
Fall 2006 |
| BACK TO BASICS: The Subject is Valves |
Tom Christian |
Winter 2005 |
| Harnessing the Power of Web Technology and E-Business |
Godard Abel |
Winter 2005 |
| An Integrated Diagnostics Strategy for Digital Positioners |
Jorg Kiesbauer |
Winter 2005 |
| Digital Instrumentation in a Nuclear Power Plant |
Bill Fitzgerald and Charles Linden |
Spring 2005 |
| Don't Overlook Linear Actuators on Gate Valves |
Cooper Etheridge |
Spring 2005 |
| Copycats and Thieves: Knock It Off! |
Dan Velan |
Spring 2005 |
| BACK TO BASICS: How To Select An Electric Actuator |
Howard Williams |
Summer 2005 |
| Technology of the Buckling Pin |
Julian Taylor and Jon Akins |
Summer 2005 |
| Final Control Solutions For Safety Systems |
Tom Jeansonne |
Summer 2005 |
| BACK TO BASICS: The Ever-Popular Gate Valve |
Greg Johnson |
Summer 2005 |
| BACK TO BASICS: Pressure-Seal Valves |
Donald A. Bowers, Jr. |
Fall 2005 |
| Valves and Castings: Cycles of Concern |
Mark Ward, Sr. |
Fall 2005 |
| Choosing For Isolation: The Case for Ball Valves |
Alexander Lucitti |
Winter 2004 |
| Valve Repair: Changes, Challenges |
Greg Johnson |
Summer 2004 |
| The Actuator Choice: Traditional or High Tech? |
Richard D. Oaks |
Fall 2004 |
| A Primer on Selecting & Sizing of Safety Valves |
Stephen Gow |
Winter 2003 |
| Intelligent Electric Valve Actuators End-User Benefits |
Carl Johnson |
Winter 2003 |
| Advanced Packing Technology Minimizes Maintenance |
Al Libke |
Spring 2003 |
| The Enemy Within |
Ralph Herbrick, Ph.D.
|
Summer 2003 |
| Finally..A True Electric Fail-Safe Spring-Return Actuator |
Gregg Alvarado |
Fall 2003 |
| Can You Afford Not to Develop a Proactive Relationship with Your Suppliers? |
Clay D. Canterbury |
Winter 2002 |
| Control Valve Stem Seal Options |
Andrew D. Butcher |
Spring 2002 |
| Control Valve Positioner Technology |
Andrew D. Butcher |
Summer 2002 |
| World Standards for Safety Valves |
Stephen Gow |
Fall 2002 |
| Considering Mechanical Partial Stroke Test Devices for Process ESD & Safety-Related Valves |
Mike Mitchell |
Fall 2002 |
| An Introduction to the 9Cr-1Mo-V Alloys |
Donald R. Bush |
Winter 2001 |
| Let's Keep It Simple: Pilot Operated Regulators |
Tom Popeck |
Spring 2001 |
| Beware of Consultants Selling Cures |
Jim Teegarden |
Spring 2001 |
| Breaking the Valve Packing Paradigm |
Meredith Miller, Floyd Jury and
Stan Koloboff |
Summer 2001 |
| Existing Process Sampling Methods & New Sampling Devices for the Process Industry |
Kevin Cook |
Fall 2001 |
| Prospering With Valves That Think and Communicate |
Wally Stommes |
Winter 2000 |
| Welding of Carbon Steel Materials for Use in Sour Service |
Don Bush |
Summer 2000 |
New Generation of Valve Actuators Can Provide Important MOV Predictive Maintenance Data
|
Chris Warnett |
Summer 2000 |
Valve Magazine Reprints
